Safety Instructions for Operating the Product:
When using the product, follow the general electrical safety rules. The required electrical power for the product's operation is 1.5 kW. Before starting the operation of the product, check the condition of the electrical outlet, and make sure there are no visible external damages to the connecting cables and the product itself. It is prohibited to plug the product into the outlet if the power cable or the product’s equipment is damaged.
The product must be installed on a level, horizontal surface.
The product should not be installed closer than 2 meters from heating or warming appliances.
The normal operation of the product is possible when it is connected to an electrical outlet with grounding.
Prohibited!
Repairing the product independently, making any changes to its design, connecting non-standard and/or homemade peripheral devices, or using non-standard and/or damaged cables.
Instructions for operation and maintenance:
  • Temperature range – from -5ºC to +45ºC
  • Air humidity – no more than 30%
  • Power supply – 220V, 50Hz
  • Preventive maintenance of the computer to detect and remove harmful programs – monthly.
Projection Module Adjustment
The projection module should be adjusted every time after disassembling and assembling the product, as well as when necessary. To adjust the projection module, connect the product to the power supply network; press the power button on the remote control or on the projector itself to turn it on.
WARNING! Avoid direct light from the projector entering your eyes, as this may lead to vision deterioration.
Warranty Obligations
The manufacturer guarantees that the product meets safety requirements, provided that the consumer follows the rules for use, transportation, storage, installation, and operation.
The warranty covers all defects caused by the manufacturer.
The warranty does not cover defects that occur in the following cases:
  • Violation of the specified transportation, storage, installation, operation, and maintenance conditions of the product.
  • Improper transportation and loading/unloading operations.
  • Presence of traces of substances harmful to the materials of the product.
  • Damage caused by fire, natural disasters, or force majeure circumstances.
  • Damage caused by improper actions of the consumer.
  • Traces of external interference with the product's design.